 |
|
 |
Greasable shackle bolt for YJ and CJ applications. Recommended use with sleeve (4000), and OMESB57 bushing kit. Includes zerk fitting. Price: $5.39 |
 |
This kit includes everything you need to install YJ springs on your CJ, except your front spring plates will need to be modified or replaced to accomodate the wider spring. Two Rock Mount spring hanger (400100) kits, eight 1/2" greasable bolts (40012), eight sleeves (40000), four bushing kits (OMESB57), and eight shackle plates (C0452040415). These components are all available individually as well. Price: $329.95 |
 |
This kit includes tie rod ends, cone seats, taper tool, and heavy duty 1-1/8" steel tie rods for better clearance and durability with an otherwise stock steering configuration. Price: $209.95 |
 |
This is a heavy duty, long-travel, CV-style rear driveshaft that is less prone to wear and tear, that makes it easier to eliminate vibrations. This driveshaft will fit on 2" to 4.5" lifted applications, and requires a CV-1310 transfer case yoke conversion. (JB Conversions bolt-on) Price: $279.95 |
 |
Finally, a real suspension upgrade kit for CJ's that works! This kit allows you to put the longer, wider Wrangler springs on your '76-'86 CJ. We used the Old Man Emu Wrangler springs and shocks which are by far the best riding and flexing spring that we've found. We build all the bracketry that you'll need to convert your CJ with the Old Man Emu springs and shocks. Our kit requires absolutely no drilling or welding and all the bracketry is built extremely tough to handle the most rugged trails. Wheel travel is increased to over 8" in the front and 9" in the rear and also indexes over 800 on a 23 degree articulation ramp. Street driving conditions, along with ride quality, are greatly improved. Old Man Emu shocks are valved specifically for your CJ's. Starting at: $487.95 |
 |
Fits CJ Dana 30 axles, and all Dana 44 axles. Great steering modification for spring-over-axle applications. Includes set of right and left flat-top knuckles, CNC machined high clearance arms, heavy duty 10-18 solid steel steering rods, 3/4" heavy duty tie rod ends, and all hardware included for bolt on installation. Price: $895.00 |
 |
This is a heavy duty cast pair of frame mounted leaf spring / shackle assembly hangers. These hangers are guaranteed for life, and offer 1/2" additional drop. These are recommended if you want to perform a CJ to YJ spring conversion. Use bushing kit OMESB57. Price: $99.00 |
 |
Stock YJ shackle plate. Price: $4.95 |
 |
Shackle eye bushing sleeve for CJ or YJ. Fits 1/2" greasable bolt. Price: $3.95 |
 |
Pair of replacement front frame mounted shackle hanger for Jeep CJ. For use with a CJ specific leaf springs and shackle configuration. Standard CJ width. Price: $49.95 |
 |
Pair of replacement rear frame mounted shackle hanger for Jeep CJ. For use with a CJ leaf springs and shackle configuration. Standard CJ rear width. Price: $59.95 |
 |
This u-bolt is used with our u-bolt flip plates.
Sold individually. Price: $5.39 |
 |
Tapered sleeves allowing you to flip your tie rods to the upper side of your stock steering knuckle. This is an affordable and must-have modification. Check tie rod clearance for spring over applications. Gain at least 3" of ground clearance for your steering components! Sleeves are tapered on inside and outside. Kit includes 3 sleeves, and a 7/16" - 1" reamer. Price: $72.95 |
 |
This kit includes tie rod ends, cone seats, and taper tool for better tie rod clearance with an otherwise stock steering configuration. Starting at: $99.95 |
 |
Sold individually for Jeep CJ (3 required) and YJ (2 required). Tapered sleeves allowing you to flip your tie rods to the upper side of your stock steering knuckle. Check tie rod clearance for spring over applications. Gain at least 3" of ground clearance for your steering components! Sleeves are tapered on inside and outside. Price: $9.95 |
 |
Sold individually for Jeep CJ (3 required) and YJ (2 required). Tapered sleeves allowing you to flip your tie rods to the upper side of your stock steering knuckle. Check tie rod clearance for spring over applications. Gain at least 3" of ground clearance for your steering components! Sleeves are tapered on inside and outside. Price: $46.95 |
 |
You can use these plates to flip the u-bolts on your axles. This will help maximize ground clearance underneath your axles, and also prevent your threaded u-bolt ends from being damaged by terrain. This kit includes square u-bolts and u-bolt flip plates. For some applications, these plates might also require custom fabricated shock mounts and/or sway bar link mounts. Price: $149.95 |
 |
You can use these plates to flip the u-bolts on your axles. This will help maximize ground clearance underneath your axles, and also prevent your threaded u-bolt ends from being damaged by terrain. Square u-bolts are required to complete this conversion. For some applications, these plates might also require custom fabricated shock mounts and/or sway bar link mounts. Price: $139.00 |
 |
This is a universal, direct weld-on, shock mount bracket. Perfect for custom suspension or axle applications. This part has also been used as a sway bar link mount. Price: $11.99 |
